2012-05-19 00:00:00
Click:
**Basic Information**
- **Name**: Silica Gel
- **Alias**: Silicone rubber (note: this is a common misnomer; scientifically, silicone rubber is different, but the text lists it; I'll translate as given)
- **English Name**: Silicon dioxide (this is also imprecise; silica gel is hydrated silica, but I'll follow the text)
- **English Aliases**: Silica gel; Silica
- **Molecular Formula**: H₂SiO₃
- **Molecular Weight**: 60.08
- **CAS Registry Number**: CAS# 112926-00-8
- **EINECS Registry Number**: 231-545-4
- **Density**: 2.6
**Definition**: Chemical formula xSiO₂·yH₂O. Transparent or milky white granular solid. It has an open porous structure, strong adsorptivity, and can adsorb a variety of substances. For example, it absorbs moisture, with a hygroscopic capacity up to about 40%. If cobalt chloride is added, it appears blue when dry and turns pink after absorbing water. It can be regenerated and reused.
Generally, silica gel can be divided into organic silicone and inorganic silica gel based on its nature and composition.
Inorganic silica gel is a highly active adsorption material, usually produced by reacting sodium silicate with sulfuric acid, followed by a series of post-treatment processes such as aging and acid soaking. Silica gel is an amorphous substance with the chemical formula mSiO₂·nH₂O. It is insoluble in water and any solvent, non‑toxic, odorless, and chemically stable. It does not react with any substance except strong alkalis and hydrofluoric acid. Different types of silica gel have different micropore structures due to different manufacturing methods. The chemical composition and physical structure of silica gel determine that it has many characteristics that other similar materials find difficult to replace: high adsorption performance, good thermal stability, stable chemical properties, and relatively high mechanical strength.
Based on pore size, silica gel is classified into: macroporous silica gel, coarse‑pored silica gel, type B silica gel, and fine‑pored silica gel. Due to different pore structures, their adsorption properties vary. Coarse‑pored silica gel has a higher adsorption capacity at high relative humidity, while fine‑pored silica gel has a higher adsorption capacity than coarse‑pored silica gel at low relative humidity. Type B silica gel, with pore structure between coarse and fine, has adsorption capacity between the two. Macroporous silica gel is generally used as catalyst carrier, matting agent, toothpaste abrasive, etc. Therefore, different varieties should be selected according to different applications.
**Safety Performance**
Silica gel's main component is silicon dioxide, which is chemically stable and non‑combustible. Silica gel is an amorphous silica; the workshop dust content should be controlled to no more than 10 mg/m³, with enhanced exhaust ventilation, and wearing masks during operation.
Silica gel has strong adsorption capacity and can dry human skin; therefore, protective work clothing should be worn during operation. If silica gel enters the eyes, rinse with plenty of water and seek medical treatment as soon as possible.
Blue silica gel, due to its small content of cobalt chloride, is toxic and should be kept away from food contact and inhalation. In case of poisoning, seek medical treatment immediately.
During use, silica gel's adsorption capacity decreases because it adsorbs water vapor or other organic substances from the medium. It can be reused after regeneration.
**I. Regeneration of Silica Gel After Adsorbing Water Vapor**
After adsorbing moisture, silica gel can be regenerated by thermal desorption to remove water. Various heating methods are available, such as electric furnaces, waste heat from flue gases, and hot air drying.
The desorption heating temperature should be controlled at 120‑180°C. For blue gel indicator, color‑changing silica gel, and DL‑type blue silica gel, the temperature should be controlled at 100‑120°C. The maximum temperature for regeneration of various industrial silica gels should not exceed the following limits:
- Coarse‑pored silica gel: not higher than 600°C;
- Fine‑pored silica gel: not higher than 200°C;
- Blue gel indicator (or color‑changing silica gel): not higher than 120°C;
- Silica‑alumina gel: not higher than 350°C.
After regeneration, the moisture content of silica gel is generally controlled below 2% before it can be put back into use.
**II. Regeneration of Silica Gel After Adsorbing Organic Impurities**
1. **Calcination method**: For coarse‑pored silica gel, it can be placed in a calcining furnace and gradually heated to 500‑600°C for about 6‑8 hours until the gel particles turn white or yellowish‑brown. For fine‑pored silica gel, the calcination temperature must not exceed 200°C.
2. **Rinsing method**: After the silica gel adsorbs saturated water vapor, soak it in hot water and rinse, optionally using detergents to remove waste oil or other organic impurities, then rinse with clean water and dry to remove water.
3. **Solvent flushing method**: Based on the type of organic substances adsorbed, select an appropriate solvent to dissolve the organic matter adsorbed in the silica gel, then heat the silica gel to remove the solvent.
**III. Precautions for Silica Gel Regeneration**
1. During drying and regeneration, the temperature should be increased gradually to avoid violent drying that causes gel particle cracking and reduces recovery rate.
2. During calcination regeneration, excessive temperature can cause changes in the pore structure of silica gel and significantly reduce its adsorption effectiveness, affecting its use value. For blue gel indicator or color‑changing silica gel, the desorption regeneration temperature should not exceed 120°C; otherwise, the color indicator will gradually oxidize and lose its color‑indicating function.
3. After regeneration, silica gel should generally be sieved to remove fine particles to ensure uniform particle size.
**Storage and Packaging**
Silica gel has strong hygroscopicity, so it should be stored in a dry place, with shelves between packaging and the floor. Packaging includes steel drums, paper drums, cartons, plastic bottles, polyethylene plastic composite bags, flexible bulk containers, etc. During transportation, it should be protected from rain, moisture, and direct sunlight.
更多资讯