silicone rubber

2012-05-19 00:00:00

Click:

**English Translation**

**I. The Basic Structural Units and Properties of Silicone Products**

The basic structural unit of silicone products is composed of silicon-oxygen (Si-O) chains, with side chains connected to the silicon atoms through various organic groups. Therefore, the structure of silicone products contains both 'organic groups' and an 'inorganic structure.' This unique composition and molecular structure endows them with a combination of organic characteristics and inorganic functionalities. Compared with other polymer materials, the most outstanding properties of silicone products are:

**1. Temperature Resistance**

Silicone products are based on a main chain structure of Si-O bonds. The bond energy of the C-C bond is 82.6 kcal/mol, while that of the Si-O bond in silicones is 121 kcal/mol. Therefore, silicone products exhibit high thermal stability. At high temperatures (or under radiation), the molecular chemical bonds do not break or decompose. Silicones not only resist high temperatures but also low temperatures, allowing them to be used over a wide temperature range. Both their chemical properties and physical mechanical properties change very little with temperature.

**2. Weather Resistance**

The main chain of silicone products is -Si-O-, with no double bonds present, making them resistant to decomposition by ultraviolet light and ozone. Silicones possess better thermal stability, radiation resistance, and weatherability than other polymer materials. The service life of silicones in natural environments can reach several decades.

**3. Electrical Insulation Properties**

Silicone products all have good electrical insulation properties. Their dielectric loss, voltage resistance, arc resistance, corona resistance, volume resistivity, and surface resistivity rank among the best of insulating materials. Moreover, their electrical properties are minimally affected by temperature and frequency. Thus, they serve as stable electrical insulating materials widely used in the electronics and electrical industries. Besides excellent heat resistance, silicones also exhibit outstanding water repellency, which ensures high reliability for electrical equipment used under wet conditions.

**4. Physiological Inertness**

Polysiloxane compounds are among the most inert compounds known. They are highly resistant to biological aging, exhibit no rejection reaction with animal bodies, and possess good anticoagulant properties.

**5. Low Surface Tension and Low Surface Energy**

The main chain of silicones is highly flexible, and the intermolecular forces are much weaker than those of hydrocarbons. Consequently, they exhibit lower viscosity, weaker surface tension, lower surface energy, and better film-forming ability compared to hydrocarbons of the same molecular weight. This low surface tension and low surface energy are the main reasons for their widespread application in properties such as hydrophobicity, defoaming, foam stabilization, anti-sticking, lubrication, and glossing.

**II. Applications of Silicones**

Due to these outstanding properties, silicones have a very wide range of applications. They are used not only as special materials in aviation, advanced technology, and military sectors but also in various national economic departments. Their applications have expanded to include construction, electronics and electrical engineering, textiles, automotive, machinery, leather and papermaking, chemical and light industries, metals and paints, and medical and healthcare.

**III. Classification of Silicones**

Silicones are mainly divided into three categories: silicone rubber, silicone resin, and silicone oil.

**IV. Classification of Silicone Rubber**

Silicone rubber is mainly divided into room temperature vulcanizing (RTV) silicone rubber and high temperature vulcanizing (HTV) silicone rubber.

**Introduction to Room Temperature Vulcanizing (RTV) Silicone Rubber and Its Classification**

Room Temperature Vulcanizing (RTV) silicone rubber is a new type of silicone elastomer introduced in the 1960s. Its most notable characteristic is its ability to cure in place at room temperature without the need for heating or pressure, making it extremely convenient to use. Hence, it quickly became an important component of the entire silicone product family upon its introduction. Today, RTV silicone rubber is widely used as adhesives, sealants, protective coatings, potting compounds, and molding materials across various industries.

RTV silicone rubber can be classified by packaging into one-component and two-component types, and by curing mechanism into condensation-curing and addition-curing types. Therefore, RTV silicone rubber can be divided into three main types based on composition, curing mechanism, and application process: one-component RTV silicone rubber, two-component condensation-curing RTV silicone rubber, and two-component addition-curing RTV silicone rubber. Each of these three series has its own characteristics: one-component RTV is advantageous for its ease of use but faces difficulties with deep-section curing; two-component RTV is characterized by no heat release during curing, very low shrinkage, no expansion, no internal stress, and simultaneous internal and surface curing, allowing for deep-section vulcanization; the curing time of addition-curing RTV depends mainly on temperature, so the curing speed can be controlled by adjusting the temperature.

Among the many synthetic rubbers, silicone rubber stands out. It is odorless, non-toxic, and unafraid of both high and low temperatures, maintaining its original strength and elasticity at temperatures ranging from 300°C down to -90°C. Silicone rubber also exhibits good electrical insulation, resistance to oxidative aging, light aging, mildew, and chemical stability. These exceptional properties have led to its extensive and important use in modern medicine. In recent years, hospitals, research institutes, and factories have collaboratively developed various silicone rubber medical products.

*   **Silicone Rubber Noise-Prevention Earplugs:** Comfortable to wear, effectively block noise, and protect the eardrum.

*   **Silicone Rubber Fetal Head Vacuum Extractor:** Easy to operate and safe to use. It can deform according to the fetal head size, preventing scalp suction and reducing the risks of scalp hematoma and intracranial injury, significantly alleviating the pain of women with difficult labor.

*   **Silicone Rubber Artificial Blood Vessels:** Possess special physiological properties, achieving high compatibility with the human body without rejection. Over time, they integrate well with human tissue.

*   **Silicone Rubber Tympanic Membrane Patch:** Thin, soft, with good smoothness and toughness, making it an ideal material for eardrum repair with simple operation and good results.

*   Other products include silicone rubber artificial trachea, artificial lung, artificial bone, and silicone rubber duodenal tubes, all with highly satisfactory performance.

**Applications of Room Temperature Vulcanizing (RTV) Silicone Rubber**

With the progress and development of modern science and technology, the medical applications of silicone rubber hold even broader prospects.

Foam silicone rubber is a porous sponge-like elastomer prepared by foaming and vulcanization at room temperature. Its base material is a condensation-curing hydroxyl-terminated silicone gum, using hydroxyl hydrogen-containing silicone oil as a blowing agent and a vinyl platinum complex as a catalyst (or dibutyltin dilaurate for heat-curing types). Other components are added to improve foam quality. The resulting foam can be used long-term from -60°C to 159°C and maintains its performance after aging tests and thermal cycling.

Due to its high thermal stability, excellent thermal insulation, electrical insulation, moisture resistance, and vibration damping (especially at high frequencies), foam silicone rubber is an ideal lightweight potting material. It provides 'moisture-proof, shock-proof, and corrosion-proof' protection for electronic components, instruments, and aerospace equipment. It is also used as filling material for thermal insulation layers, buoyancy materials in salt spray atmospheres, and sealing materials. In medicine, it is used for orthopedic filling, repair, and prosthetic applications. Flame-retardant RTV foam silicone rubber (e.g., Dow Corning DC3-6548) has been developed for fire-resistant seals in cable penetrations, offering excellent flame retardancy (limiting oxygen index up to 39) and a service life of up to 50 years, widely used in nuclear power plants, computer centers, and offshore oil platforms.

**Introduction to Two-Component Condensation-Curing RTV Silicone Rubber**

Two-component condensation-curing RTV silicone rubber is the most common type. Its base polymer is typically hydroxyl-terminated polysiloxane, combined with other ingredients and a catalyst. The curing reaction is initiated by the catalyst, not atmospheric moisture. The base polymer, filler, and crosslinker are usually packaged as one component, with the catalyst packaged separately. Curing begins when the two components are mixed. Common crosslinkers include ethyl orthosilicate, and catalysts include dibutyltin dilaurate (increasingly replaced by less toxic octyltin for food contact applications). Curing time depends on catalyst type, amount, and temperature; more catalyst leads to faster curing and shorter working time. Complete curing at room temperature takes about a day, but can be reduced to 1 hour at 150°C. Accelerators like γ-aminopropyltriethoxysilane can significantly increase the curing speed. Two-component RTV silicone rubber maintains elasticity from -65°C to 250°C and has excellent electrical properties, chemical stability, water resistance, ozone resistance, and weather resistance. It is widely used for potting and molding, especially suitable for deep-section potting due to its faster curing time.

**I. One-Component Room Temperature Vulcanizing (RTV) Silicone Rubber**

One-component RTV silicone rubber cures upon exposure to atmospheric moisture, forming an elastomer. Different crosslinkers yield various types, such as acetoxy-cure, oxime-cure, alkoxy-cure, amine-cure, amide-cure, and ketone-cure. Curing time depends on the curing system, temperature, humidity, and layer thickness; higher temperature and humidity accelerate curing. Typically, the surface becomes tack-free in 15-30 minutes, and a 0.3 cm layer cures within a day, with strength increasing over several weeks. It exhibits excellent electrical properties, chemical inertness, heat resistance, weathering resistance, flame resistance, moisture resistance, and permeability. It maintains elasticity from -60°C to 200°C, cures without heat absorption or release, shrinks minimally, and bonds well to materials. Primarily used as adhesives and sealants, other uses include form-in-place gaskets, protective coatings, and caulking compounds. Many formulations bond well to various substrates like metals, glass, ceramics, and concrete. For difficult bonding, primers can be used. However, its thickness is limited (typically<6 mm) because curing depends on atmospheric moisture and proceeds from the surface inward. Deeper curing can be facilitated by layered casting or adding magnesium oxide.

**II. Two-Component Condensation-Curing Room Temperature Vulcanizing (RTV) Silicone Rubber**

As described earlier, two-component condensation-curing RTV silicone rubber cures via a catalyst. The base resin (often a hydroxyl-terminated polysiloxane) and catalyst are packaged separately. Curing begins upon mixing. Curing time depends on catalyst type, amount, and temperature. It maintains elasticity from -65°C to 250°C and has excellent electrical properties, chemical stability, water resistance, ozone resistance, and weather resistance. It is widely used for potting and molding, particularly suited for deep-section potting. Cured products have excellent anti-stick properties and very low shrinkage, making them suitable for making flexible molds for casting various materials like epoxy resins, polyesters, polystyrenes, polyurethanes, vinyl plastics, waxes, and low-melting-point alloys. They are also used for replicating detailed patterns due to their high fidelity.

**III. Two-Component Addition-Curing Room Temperature Vulcanizing (RTV) Silicone Rubber**

Two-component addition-curing RTV silicone rubber includes silicone gels and rubbers with varying strengths. Curing occurs via an addition reaction (hydrosilylation) between vinyl (or allyl) groups on the base polymer and Si-H groups on the crosslinker, without releasing byproducts, resulting in no shrinkage during curing. These cured rubbers are non-toxic, have high mechanical strength, excellent hydrolysis resistance (even in high-pressure steam), good compression set resistance, low flammability, allow deep-section curing, and offer controllable curing speed via temperature. They are a major area of development. They maintain elasticity from -65°C to 250°C and have excellent electrical properties and chemical stability. They are widely used for potting, molding, and making flexible molds. Additives can be incorporated to provide specific properties like heat resistance, flame retardancy, thermal conductivity, or electrical conductivity.

**Specific Types of Two-Component RTV Silicone Rubber:**

*   **Methyl RTV Silicone Rubber:** General-purpose type with good water, ozone, arc, corona, and weather resistance. Used from -60°C to 200°C for potting, sealing, molding, and dental impressions.

*   **Methyl Diphenyl RTV Silicone Rubber:** Offers a wider temperature range (-100°C to 250°C). Low-phenyl grades excel at low temperatures (-120°C), while medium-phenyl grades offer good radiation, ablation, and self-extinguishing resistance. Used for high-temperature, ablation-resistant, and encapsulating applications.

*   **Methyl Block RTV Silicone Rubber:** A modified type with higher mechanical strength and adhesion than methyl RTV, used from -70°C to 200°C. It offers good vibration damping, moisture resistance, breathability, ozone resistance, weather resistance, and weak acid/base resistance. Used for potting, coatings, molds, release coatings, drug carriers, and sealants (e.g., in construction). It is also used as a fabric treatment to improve feel and abrasion resistance.

*   **Nitrile RTV Silicone Rubber:** Based on poly(β-cyanoethylmethylsiloxane), it offers improved resistance to non-polar solvents (aliphatic and aromatic) compared to standard silicone rubbers, with oil resistance similar to nitrile rubber. Used for sealing and potting electronic components in oil-contaminated environments.

*   **Fluorosilicone RTV Silicone Rubber:** Based on poly(γ-trifluoropropylmethylsiloxane), it offers excellent resistance to fuel oils, solvents, and high-temperature degradation. Used for sealing and bonding in aircraft integral fuel tanks, gaskets, pads, and general industrial applications involving fuel oils and solvents.

*   **Phenylene Silicone RTV Silicone Rubber:** Based on silphenylene-siloxane polymers, it has exceptional resistance to high-energy radiation, retaining elasticity after significant gamma or neutron irradiation. Used in atomic energy, nuclear power, and aerospace applications as high-temperature, radiation-resistant adhesives, sealants, and electrical insulation.

*   **General RTV Properties:** RTV silicones have low molecular weight (viscosity 100-1,000,000 cSt), available as pourable liquids or pastes. Reinforcement with fillers like fumed silica provides tensile strengths of 10-60 kg/cm². Additives provide specific properties (flame retardancy, conductivity, etc.). They are packaged as one- or two-component systems.

*   **High-Temperature Silicone Rubber (Methyl Phenyl Vinyl):** Methyl phenyl vinyl silicone rubber, containing phenyl groups in the side chain, offers improved low-temperature performance (down to -100°C for low-phenyl types), and better flame retardancy (self-extinguishing for medium-phenyl types) and radiation resistance (high-phenyl types). It is an important material for the aerospace industry and other advanced technologies, used for molded and extruded parts requiring low-temperature resistance, ablation resistance, thermal aging resistance, or radiation resistance.

**Additional Applications of Silicone Materials:**

*   **Silica Gel (Desiccant):** Used for moisture absorption in enclosed instruments and equipment. Color-indicating types show humidity levels. Used in packaging for precision instruments, leather, clothing, food, pharmaceuticals, and appliances. Food-grade silicone is used for baby nipples and condoms.

*   **Silica Sol (Colloidal Silica):** A colloidal solution (mSiO₂·nH₂O) with fine particles, high surface area, low viscosity, good dispersion and permeability. Used as binders for refractories (high temperature resistance), in coatings (durable, anti-soil, anti-aging, fire resistant), in precision casting (high shell strength, smooth castings), as catalyst and catalyst support, in papermaking (anti-stick agent, anti-slip agent), in textile sizing (improves spinnability of wool/rabbit hair), and as a treating agent for silicon steel sheets, a dispersant for picture tubes, and an anti-slip for floor wax.

*   **Medical Silicone:** Medical silicone is a widely used biomaterial in cosmetic and reconstructive surgery, available in various forms (liquid silicone oil, gel, foam sponge, solid elastomer). Solid silicone rubber is currently most common. It has excellent biocompatibility (non-toxic, non-irritating, non-allergenic, low rejection), good physicochemical properties (stable, retains elasticity), is stable and inert, can be sterilized by heat, and is easily processed and shaped. Types include heat-vulcanized (commonly used for pre-shaped implants like nasal implants, chin implants, cranial plates, breast implants, ear frameworks, artificial joints, testicles) and room temperature-vulcanized (formerly injected in liquid form for filling defects, now mostly discontinued due to complications).


Author: Guangdong DONESON New Materials Co., Ltd.
0
silicone rubber
Long by picture save/share

更多资讯


Copyright ©  Guangdong DONESON New Materials Co., Ltd


Contact Us

Phone: 0760-86511168

Phone: 18825004900 (Liu Gong, same WeChat account)

Phone: 18923325516 (Janny Huang from the Ministry of Foreign Trade, same WeChat number)

Fax: 0760-86511171

Address: No. 7 Zhichuang Road, Banfu Town, Zhongshan City


Scan to follow





Contact Us

Phone: 0760-86511168

Phone: 18825004900 (Liu Gong, same WeChat account)

Phone: 18923325516 (Janny Huang from the Ministry of Foreign Trade, same WeChat number)

Fax: 0760-86511171

Address: No. 7 Zhichuang Road, Banfu Town, Zhongshan City


Scan to follow

  


Copyright ©  Guangdong DONESON New Materials Co., Ltd

Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.