Application Fields
Mainly used in mobile phone protective films, process protective films and related electronic products.
Characteristics
This product is a high-molecular polysiloxane surface treatment adhesive. It has good coating properties, good adhesion to PET substrate after curing, high temperature resistance, non-toxic, odorless and non-corrosive; the adhesive film has good peel performance, strong self-adhesion, excellent bubble release performance, and the adhesive can be formulated to the desired tack by mixing high-peel and low-peel adhesives.
Usage Guidelines
1. Adhesive preparation: Dilute the adhesive with ethyl acetate or xylene, add anchor agent DS-300 and mix evenly, then add platinum catalyst DS-1500 and mix thoroughly; filter through a 1~5um nano filter before coating production.
2. Curing conditions: Lab coating process with 20um dry adhesive, cured at 145°C for 90 seconds; production coating reference process, oven (8 zones) temperature settings reference: 80°C, 110°C, 135°C, 150°C, 160°C, 150°C, 130°C, 120°C; baking time and temperature should be adjusted according to the coating weight; the thicker the dry adhesive layer, the longer the baking time should be, please adjust according to specific equipment and production process.
Performance Specifications

Storage Conditions, Shelf Life and Packaging
Adhesive should be stored in its original sealed container in a cool, ventilated indoor area below 30°C, shelf life 6 months.
DS-1500 is sensitive to light and other substances; it must be stored in its sealed container in a cool, isolated dark area indoors; shelf life 6 months.
DS-300 should be stored in its original sealed container in a cool, ventilated indoor area below 30°C; shelf life 6 months.
Packaging: 20Kg/drum, 180Kg/drum.
Precautions
1. The prepared adhesive should ideally be used within 8 hours to avoid affecting coating performance.
2. During use, avoid contact with water, impurities, tin, salts, amine additives, and organic compounds containing sulfur, phosphorus, nitrogen, or iron; these additives may inhibit the curing of the adhesive.
3. All equipment and containers must be thoroughly cleaned before contact with this product.
4. The information provided here is based on our knowledge gained in laboratory and practice, and is for reference only. However, since the conditions and methods of using this product are beyond our control, be sure to conduct pre-use testing and evaluation.

Copy product links
Long by picture save/share
更多产品推荐