Auto-voiding anaerobic OCA

产品详情

Application Areas

Substrate‑free protective film for touch‑screen display glass (mobile phones, PAD, etc.)

 

Features

This OCA is a modified high‑molecular polymer with no added volatile solvents. It features high transparency, low haze, rapid UV curing, low curing shrinkage, excellent weatherability, and is environmentally friendly and efficient. It also provides outstanding bubble‑release performance and excellent adhesion to AF‑coated surfaces.

   

Application Guidelines

Before use, filter the raw material with a 400‑mesh or finer screen to remove any gel that may have formed during transport or storage. If significant gel is found on the filter, replace the screen promptly and re‑filter the adhesive. Filtration should be carried out under yellow light or in a dark environment to prevent premature curing caused by sunlight exposure. After filtration, allow the adhesive to stand for at least 1 hour in a constant temperature and humidity environment (25 °C, 50% RH) to eliminate all bubbles and stabilize viscosity. Use an appropriate coating method (slot‑die coating is recommended) to apply the OCA adhesive uniformly onto a PET film. If the UV unit is not equipped with nitrogen purging, first laminate with a silicone release film, then pass through the UV lamp chamber for curing (adjust UV energy and line speed according to your production equipment).

 

Performance Specifications

 

Storage Conditions, Shelf Life, and Packaging

Store tightly sealed in a cool, dark, and dry place. Shelf life is 6 months. Available in 20 kg/pail and 200 kg/pail.

 

Precautions

1. This adhesive is extremely sensitive to ultraviolet light. It must be stored in a cool and dark environment. Do not expose the product directly to sunlight or UV light.

2. After filtration and before coating, allow the adhesive to stand until bubbles are completely eliminated to prevent entrapped air from affecting the film appearance and performance.

3. This adhesive is anaerobic and requires isolation from air to cure.


Auto-voiding anaerobic OCA
Long press to look detail
Long by picture save/share

更多产品推荐

UV-curable protective coating for solder joints

UV-curable protective coating for solder joints

Interview
Conformal coating

Conformal coating

Interview
Thermal grease

Thermal grease

Interview
Thermal Gel

Thermal Gel

Interview
Thermally conductive potting compound

Thermally conductive potting compound

Interview
Silicone-based PSA for in-process protective films

Silicone-based PSA for in-process protective films

Interview
Silicone PSA Series

Silicone PSA Series

Interview
High-temperature silicone PSA for hot-bending films

High-temperature silicone PSA for hot-bending films

Interview
High-low viscosity silicone adhesive blend

High-low viscosity silicone adhesive blend

Interview
Silicone PSA for three-layer protective films

Silicone PSA for three-layer protective films

Interview
Two-component (A/B) adhesive

Two-component (A/B) adhesive

Interview
Auto-voiding anaerobic OCA

Auto-voiding anaerobic OCA

Interview


Copyright ©  Guangdong DONESON New Materials Co., Ltd


Contact Us

Phone: 0760-86511168

Phone: 18825004900 (Liu Gong, same WeChat account)

Phone: 18923325516 (Janny Huang from the Ministry of Foreign Trade, same WeChat number)

Fax: 0760-86511171

Address: No. 7 Zhichuang Road, Banfu Town, Zhongshan City


Scan to follow





Contact Us

Phone: 0760-86511168

Phone: 18825004900 (Liu Gong, same WeChat account)

Phone: 18923325516 (Janny Huang from the Ministry of Foreign Trade, same WeChat number)

Fax: 0760-86511171

Address: No. 7 Zhichuang Road, Banfu Town, Zhongshan City


Scan to follow

  


Copyright ©  Guangdong DONESON New Materials Co., Ltd

Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.