Two-component (A/B) adhesive

产品详情

Application Areas

Used for glass protective films for touch display screens such as mobile phones and PADs.

 

Characteristics

AB adhesive glass film is a double-sided tape based on optical PET film, coated with silicone on one side and OCA optical adhesive on the other side; the OCA adhesive side is laminated with silicone release film. It has excellent OCA adhesive bonding performance, good anchorage of silicone to PET substrate, no snowflakes (optical defects) and no residue when laminated to glass, and has excellent bubble release performance.

 

Usage Guidelines

1. Adhesive preparation: Dilute the adhesive with ethyl acetate or xylene, add anchoring agent DS-300 and mix evenly, then add platinum catalyst DS-1500 and mix thoroughly; filter with 1~5 μm nanofilter cartridge, then coating production can proceed.

2. Curing conditions: Laboratory coating process with 20 μm dry adhesive, cured at 145°C for 90 seconds; production coating reference process, oven (8 zones) temperature settings reference: 80°C, 110°C, 135°C, 150°C, 160°C, 150°C, 130°C, 120°C; baking time and temperature are adjusted according to coating weight; the thicker the dry adhesive coating, the longer the baking time should be increased accordingly. Please refer to the specific

equipment and production process for adjustment.

 

Performance Indicators

 

 

Storage Conditions, Shelf Life and Packaging

Adhesive: Store in original sealed container in a cool, ventilated indoor place below 30°C; shelf life is 6 months.

DS-1500 is sensitive to light and other substances; it must be stored tightly sealed in a cool, isolated indoor dark place; shelf life is 6 months.

DS-300: Store in original sealed container in a cool, ventilated indoor place below 30°C; shelf life is 6 months.

Packaging: 20 kg/drum, 180 kg/drum.

 

Precautions

1. The prepared adhesive should preferably be used within 8 hours to avoid affecting coating performance.

2. During use, avoid contact with water, impurities, tin, salts, amine additives, and organic substances containing sulfur, phosphorus, nitrogen, or iron; these additives may inhibit the curing of the adhesive.

3. All equipment and containers must be thoroughly cleaned before contact with this product.

4. The information provided here is based on our knowledge gained in the laboratory and practice, and is for reference only. However, since the conditions and methods of use are beyond our control, it is essential to conduct tests and evaluations before use.


Two-component (A/B) adhesive
Long press to look detail
Long by picture save/share

更多产品推荐

UV-curable protective coating for solder joints

UV-curable protective coating for solder joints

Interview
Conformal coating

Conformal coating

Interview
Thermal grease

Thermal grease

Interview
Thermal Gel

Thermal Gel

Interview
Thermally conductive potting compound

Thermally conductive potting compound

Interview
Silicone-based PSA for in-process protective films

Silicone-based PSA for in-process protective films

Interview
Silicone PSA Series

Silicone PSA Series

Interview
High-temperature silicone PSA for hot-bending films

High-temperature silicone PSA for hot-bending films

Interview
High-low viscosity silicone adhesive blend

High-low viscosity silicone adhesive blend

Interview
Silicone PSA for three-layer protective films

Silicone PSA for three-layer protective films

Interview
Two-component (A/B) adhesive

Two-component (A/B) adhesive

Interview
Auto-voiding anaerobic OCA

Auto-voiding anaerobic OCA

Interview


Copyright ©  Guangdong DONESON New Materials Co., Ltd


Contact Us

Phone: 0760-86511168

Phone: 18825004900 (Liu Gong, same WeChat account)

Phone: 18923325516 (Janny Huang from the Ministry of Foreign Trade, same WeChat number)

Fax: 0760-86511171

Address: No. 7 Zhichuang Road, Banfu Town, Zhongshan City


Scan to follow





Contact Us

Phone: 0760-86511168

Phone: 18825004900 (Liu Gong, same WeChat account)

Phone: 18923325516 (Janny Huang from the Ministry of Foreign Trade, same WeChat number)

Fax: 0760-86511171

Address: No. 7 Zhichuang Road, Banfu Town, Zhongshan City


Scan to follow

  


Copyright ©  Guangdong DONESON New Materials Co., Ltd

Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.