Application Field
Mainly used in protective films for touch screens such as mobile phones, PADs, etc.
Characteristics
This product is a polymeric polysiloxane-based surface treatment adhesive, with good coating performance. After curing, it exhibits excellent adhesion to PET substrates, very fast bubble release, good adsorption, high weather resistance, anti-scratch properties, high film hardness, no residue, and easy repositioning.
Usage Guidelines
1. Adhesive preparation: Dilute the adhesive with ethyl acetate or xylene, add anchoring agent DS-300 and stir evenly, then add platinum catalyst DS-1500 and mix thoroughly; filter through a 1~5μm nano filter cartridge before coating production.
2. Curing conditions: Laboratory coating process with 20μm dry film thickness, cured at 145°C for 90 seconds; reference production coating oven (8 zones) temperature settings: 80°C, 110°C, 135°C, 150°C, 160°C, 150°C, 130°C, 120°C; baking time and temperature should be adjusted according to coating weight; the thicker the dry adhesive layer, the longer the baking time should be correspondingly increased. Please adjust according to your specific equipment and production process.
Performance Specifications

Storage Conditions, Shelf Life, and Packaging
Adhesive should be stored in its original sealed container in a cool, ventilated indoor area below 30°C, with a shelf life of 6 months.
DS-1500 is sensitive to light and other substances; it must be stored in a sealed container in a cool, isolated, dark indoor area; shelf life 6 months.
DS-300 should be stored in its original sealed container in a cool, ventilated indoor area below 30°C; shelf life 6 months.
Packaging: 20Kg/drum, 180Kg/drum.
Precautions
1. The prepared adhesive should be used within 8 hours to avoid affecting coating performance.
2. During use, avoid contact with water, impurities, tin, salts, amine-type additives, and organic compounds containing sulfur, phosphorus, nitrogen, or iron; these contaminants may inhibit curing of the adhesive.
3. All equipment and containers must be thoroughly cleaned before contact with this product.
4. The information provided herein is based on our knowledge gained from laboratory and practical experience, and is for reference only. However, since the conditions and methods of using this product are beyond our control, it is essential to conduct pre-use testing and evaluation.

Copy product links
Long by picture save/share
更多产品推荐