Applications
Used for solder joint adhesion protection on materials such as PCB, glass, metal, and ceramics, as well as electronic component BGA packaging, wire harness encapsulation, PIN pin coating, etc.
Product Features
UV light curing, with secondary heat curing for shadowed areas; high temperature resistance and excellent thermal shock resistance;
Low hardness, low stress, high thixotropy; after curing, it forms a soft moisture-proof coating that provides excellent protection for both flexible and rigid platforms.
Application Guidelines
Use an appropriate dispensing method (manual or automatic dispenser) to apply the adhesive from black cartridges and UV-resistant needles evenly onto the substrate, then pass through a UV lamp tunnel for curing (adjust UV lamp energy and line speed according to production equipment). Note: If shadowing causes incomplete curing, secondary heat curing can be applied at 120°C/30 minutes or 150°C/15 minutes.
Performance Specifications
Storage Conditions, Shelf Life, and Packaging
Store tightly sealed in a cool (10~35°C), dark, and dry place. Shelf life is 12 months (in original unopened packaging); working life is 7 months after opening the original container.
Precautions
This adhesive is very sensitive to UV light. It must be stored in a cool and dark environment. Do not expose the product to direct sunlight or UV light.
After filtration before use, allow the adhesive to stand to eliminate air bubbles before dispensing, to prevent bubble entrapment during production that may affect the coating appearance and performance.
This adhesive is irritating to skin. If accidentally contacted, rinse immediately with plenty of water.

Copy product links
Long by picture save/share
更多产品推荐