Silicone PSA Series

产品详情

Application Fields

Mainly used for high-temperature tape, green tape, battery tape, Kapton tape, and other series of products.

 

Characteristics

Silicone pressure-sensitive adhesive is a high-performance adhesive product. It possesses the unique properties of silicone and exhibits excellent adhesion to substrates that are difficult for many polymeric adhesives to bond. The PSA series silicone pressure-sensitive adhesives use a platinum-cure system. Compared with the BPO (benzoyl peroxide) cure system, it is odorless, non-toxic, requires no primer treatment on PET substrates, and does not require high-temperature curing. The platinum-cure system offers stable peel strength, good bubble-release performance, and high tack and peel strength.

 

Usage Guide

1. Adhesive preparation: Dilute the adhesive with ethyl acetate or xylene, add anchorage additive DS-300 and mix well, then add platinum catalyst DS-1500 and mix thoroughly. Filter through a 1~5 μm nano filter and it is ready for coating.

 

2. Curing conditions: Lab coating process: 20 μm dry adhesive thickness, cured at 145 °C for 90 seconds. Production coating reference process: oven (8 zones) temperature settings reference: 80 °C, 110 °C, 135 °C, 150 °C, 160 °C, 150 °C, 130 °C, 120 °C. Baking time and temperature should be adjusted according to the coating weight; thicker dry adhesive layers require longer baking times. Please adjust according to your specific equipment and production process.

 

Performance Specifications

 

 

Storage Conditions, Shelf Life, and Packaging

Adhesive: Store in original sealed container in a cool, ventilated indoor area below 30 °C. Shelf life: 6 months.

DS-1500 is sensitive to light and other substances; it must be stored in original sealed container in a cool, isolated, dark indoor area. Shelf life: 6 months.

DS-300: Store in original sealed container in a cool, ventilated indoor area below 30 °C. Shelf life: 6 months.

Packaging: 20 kg/drum, 180 kg/drum.

 

Precautions

The mixed adhesive should be used within 8 hours to avoid affecting coating performance.

During use, avoid contact with water, impurities, tin, salts, amine additives, and organic substances containing sulfur, phosphorus, nitrogen, or iron; these may inhibit the curing of the adhesive.

All equipment and containers must be thoroughly cleaned before contact with this product.

The information provided here is based on our knowledge gained in laboratory and practice, and is for reference only. Since the conditions and methods of use are beyond our control, it is essential to test and evaluate the product before use.


Silicone PSA Series
Long press to look detail
Long by picture save/share

更多产品推荐

UV-curable protective coating for solder joints

UV-curable protective coating for solder joints

Interview
Conformal coating

Conformal coating

Interview
Thermal grease

Thermal grease

Interview
Thermal Gel

Thermal Gel

Interview
Thermally conductive potting compound

Thermally conductive potting compound

Interview
Silicone-based PSA for in-process protective films

Silicone-based PSA for in-process protective films

Interview
Silicone PSA Series

Silicone PSA Series

Interview
High-temperature silicone PSA for hot-bending films

High-temperature silicone PSA for hot-bending films

Interview
High-low viscosity silicone adhesive blend

High-low viscosity silicone adhesive blend

Interview
Silicone PSA for three-layer protective films

Silicone PSA for three-layer protective films

Interview
Two-component (A/B) adhesive

Two-component (A/B) adhesive

Interview
Auto-voiding anaerobic OCA

Auto-voiding anaerobic OCA

Interview


Copyright ©  Guangdong DONESON New Materials Co., Ltd


Contact Us

Phone: 0760-86511168

Phone: 18825004900 (Liu Gong, same WeChat account)

Phone: 18923325516 (Janny Huang from the Ministry of Foreign Trade, same WeChat number)

Fax: 0760-86511171

Address: No. 7 Zhichuang Road, Banfu Town, Zhongshan City


Scan to follow





Contact Us

Phone: 0760-86511168

Phone: 18825004900 (Liu Gong, same WeChat account)

Phone: 18923325516 (Janny Huang from the Ministry of Foreign Trade, same WeChat number)

Fax: 0760-86511171

Address: No. 7 Zhichuang Road, Banfu Town, Zhongshan City


Scan to follow

  


Copyright ©  Guangdong DONESON New Materials Co., Ltd

Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.