Silicone-based PSA for in-process protective films

产品详情

Applications

Screen protectors for mobile phones, PADs and other digital products

Process protection film for panels and lens glass

ITO glass protection film

 

Characteristics

This product is a high-molecular-weight polysiloxane surface treatment adhesive. It cures at medium temperature (140°C-150°C) and can bond firmly to PET plastic film. After curing, the adhesive film has high bonding strength to PET, good flexibility, impact resistance, water resistance, media resistance and aging resistance; the adhesive film is bubble-free, heat-resistant, non-toxic, odorless and non-corrosive; it has excellent peel performance, strong self-adhesion, good bubble release, no adhesive transfer, and no residue.

 

Application Guidelines

 1. Adhesive preparation: Dilute the adhesive with ethyl acetate or xylene, add anchoring agent DS-300 and mix evenly, then add platinum catalyst DS-1500 and mix thoroughly; filter through a 1~5μm nanofilter, and it is ready for coating production.

 

2. Curing conditions: Laboratory coating process with 20μm dry adhesive thickness, cured at 145°C for 90 seconds; recommended production coating oven (8 zones) temperature settings: 80°C, 110°C, 135°C, 150°C, 160°C, 150°C, 130°C, 120°C; baking time and temperature should be adjusted according to the coating weight; the thicker the dry adhesive layer, the longer the baking time should be. Please adjust according to your specific equipment and production process.

 

Performance Specifications

 

 

Storage Conditions, Shelf Life and Packaging

Adhesive in its original sealed container should be stored in a cool, ventilated indoor area at below 30°C, shelf life 6 months.

DS-1500 is sensitive to light and other substances; it must be kept in its original sealed container, stored in a cool, isolated dark indoor area; shelf life 6 months.

DS-300 in its original sealed container should be stored in a cool, ventilated indoor area below 30°C; shelf life 6 months.

Packaging: 20Kg/drum, 180Kg/drum.

 

Precautions

The prepared adhesive should be used within 8 hours for best coating performance.

During use, avoid contact with water, impurities, tin, salts, amine additives, and organic compounds containing sulfur, phosphorus, nitrogen, or iron; these additives may inhibit curing of the adhesive.

All equipment and containers must be thoroughly cleaned before contact with this product.

The information provided here is based on our knowledge gained from laboratory and practical experience, and is for reference only. Since the conditions and methods of use are beyond our control, it is essential to conduct testing and evaluation before use.


Silicone-based PSA for in-process protective films
Long press to look detail
Long by picture save/share

更多产品推荐

UV-curable protective coating for solder joints

UV-curable protective coating for solder joints

Interview
Conformal coating

Conformal coating

Interview
Thermal grease

Thermal grease

Interview
Thermal Gel

Thermal Gel

Interview
Thermally conductive potting compound

Thermally conductive potting compound

Interview
Silicone-based PSA for in-process protective films

Silicone-based PSA for in-process protective films

Interview
Silicone PSA Series

Silicone PSA Series

Interview
High-temperature silicone PSA for hot-bending films

High-temperature silicone PSA for hot-bending films

Interview
High-low viscosity silicone adhesive blend

High-low viscosity silicone adhesive blend

Interview
Silicone PSA for three-layer protective films

Silicone PSA for three-layer protective films

Interview
Two-component (A/B) adhesive

Two-component (A/B) adhesive

Interview
Auto-voiding anaerobic OCA

Auto-voiding anaerobic OCA

Interview


Copyright ©  Guangdong DONESON New Materials Co., Ltd


Contact Us

Phone: 0760-86511168

Phone: 18825004900 (Liu Gong, same WeChat account)

Phone: 18923325516 (Janny Huang from the Ministry of Foreign Trade, same WeChat number)

Fax: 0760-86511171

Address: No. 7 Zhichuang Road, Banfu Town, Zhongshan City


Scan to follow





Contact Us

Phone: 0760-86511168

Phone: 18825004900 (Liu Gong, same WeChat account)

Phone: 18923325516 (Janny Huang from the Ministry of Foreign Trade, same WeChat number)

Fax: 0760-86511171

Address: No. 7 Zhichuang Road, Banfu Town, Zhongshan City


Scan to follow

  


Copyright ©  Guangdong DONESON New Materials Co., Ltd

Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.