UV-curable coating for printed PET substrates

产品详情

Application Fields

Suitable for surface treatment of difficult-to-adhere PET materials and printable hard coatings.

 

Features

After curing, it provides low curing shrinkage and good printability;

DSU-9110 provides good adhesion between OCA optical adhesive and PET substrate without affecting OCA adhesive performance;

DSU-9150 is a printable grade hard coating;

DSU-9190 is a primer matched with DSU-19AF thermoforming coating, providing good adhesion and boiling water resistance.

 

Usage Guidelines

Before coating DSU-9110, DSU-9150, or DSU-9190, filter through a 1-micron filter bag, dilute with ethyl acetate to the appropriate ratio, and then cure according to the recommended curing process for the product.

 

Performance Specifications

 

Storage Conditions, Shelf Life, and Packaging

DSU-9110, DSU-9150, and DSU-9190 are light-sensitive; they must be stored in a cool, dark place. Do not expose the product directly to sunlight or UV light. Shelf life is 12 months. 20 kg/drum.

 

Precautions

1. It is recommended to control the production workshop temperature at 20–30 °C and humidity at 35–60%. Too low temperature may cause poor leveling and poor adhesion; excessive humidity may cause coating cratering; too low humidity may create electrostatic safety hazards.

2. This series of products is developed for general industrial use. Since equipment, materials, and operations vary, we cannot guarantee for individual cases. Please conduct comprehensive tests before use and determine the most appropriate application method at your own discretion.


UV-curable coating for printed PET substrates
Long press to look detail
Long by picture save/share

更多产品推荐

UV-curable protective coating for solder joints

UV-curable protective coating for solder joints

Interview
Conformal coating

Conformal coating

Interview
Thermal grease

Thermal grease

Interview
Thermal Gel

Thermal Gel

Interview
Thermally conductive potting compound

Thermally conductive potting compound

Interview
Silicone-based PSA for in-process protective films

Silicone-based PSA for in-process protective films

Interview
Silicone PSA Series

Silicone PSA Series

Interview
High-temperature silicone PSA for hot-bending films

High-temperature silicone PSA for hot-bending films

Interview
High-low viscosity silicone adhesive blend

High-low viscosity silicone adhesive blend

Interview
Silicone PSA for three-layer protective films

Silicone PSA for three-layer protective films

Interview
Two-component (A/B) adhesive

Two-component (A/B) adhesive

Interview
Auto-voiding anaerobic OCA

Auto-voiding anaerobic OCA

Interview


Copyright ©  Guangdong DONESON New Materials Co., Ltd


Contact Us

Phone: 0760-86511168

Phone: 18825004900 (Liu Gong, same WeChat account)

Phone: 18923325516 (Janny Huang from the Ministry of Foreign Trade, same WeChat number)

Fax: 0760-86511171

Address: No. 7 Zhichuang Road, Banfu Town, Zhongshan City


Scan to follow





Contact Us

Phone: 0760-86511168

Phone: 18825004900 (Liu Gong, same WeChat account)

Phone: 18923325516 (Janny Huang from the Ministry of Foreign Trade, same WeChat number)

Fax: 0760-86511171

Address: No. 7 Zhichuang Road, Banfu Town, Zhongshan City


Scan to follow

  


Copyright ©  Guangdong DONESON New Materials Co., Ltd

Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.