Anaerobic OCA for full lamination

产品详情

Application Areas

Bonding of optical film sheets for display panels such as mobile phones and PADs.

Bonding between materials such as ITO, PAMM, PC, glass, and metal.

 

Characteristics

This OCA product is a modified polymer with no added volatile solvents; acid-free, with excellent compatibility with ITO, appropriate hardness/softness, superior step coverage, outstanding die-cutting performance, good tear resistance, excellent holding power, fast UV curing, and features low curing shrinkage, excellent weatherability, and environmental friendliness with high efficiency.

 

Application Guidelines

Before use, filter the raw material through a 400-mesh or finer filter screen to avoid gelation caused by transportation and storage. If a large amount of gel is found on the filter screen during filtration, replace the filter screen promptly and re-filter the adhesive. Filtration should be carried out under yellow light or in a dark environment to prevent curing due to sunlight exposure. After filtration, the adhesive should be left to stand for at least 1 hour in a constant temperature and humidity environment (25°C, 50% RH) to eliminate all bubbles and stabilize viscosity. Use an appropriate coating method (slot-die coating is recommended) to uniformly apply the OCA adhesive onto a PET film. If no nitrogen-purged UV unit is available, first laminate with a silicone release film, then enter the UV lamp chamber for irradiation curing (adjust UV lamp energy and production speed according to your equipment).

 

Performance Specifications

 

 

Storage Conditions, Shelf Life, and Packaging

Store tightly sealed in a cool, dark, and dry place. Shelf life is 6 months. Available in 20 kg/pail and 200 kg/pail.

 

Precautions

1. This adhesive is very sensitive to UV light. Store it in a cool and dark environment. Do not expose the product directly to sunlight or UV light.

2. After filtration, allow the adhesive to stand to eliminate bubbles before putting it on the machine, to avoid entrapped bubbles that could affect the coated film's appearance and performance.

3. This adhesive is anaerobic and requires isolation from air to cure.


Anaerobic OCA for full lamination
Long press to look detail
Long by picture save/share

更多产品推荐

UV-curable protective coating for solder joints

UV-curable protective coating for solder joints

Interview
Conformal coating

Conformal coating

Interview
Thermal grease

Thermal grease

Interview
Thermal Gel

Thermal Gel

Interview
Thermally conductive potting compound

Thermally conductive potting compound

Interview
Silicone-based PSA for in-process protective films

Silicone-based PSA for in-process protective films

Interview
Silicone PSA Series

Silicone PSA Series

Interview
High-temperature silicone PSA for hot-bending films

High-temperature silicone PSA for hot-bending films

Interview
High-low viscosity silicone adhesive blend

High-low viscosity silicone adhesive blend

Interview
Silicone PSA for three-layer protective films

Silicone PSA for three-layer protective films

Interview
Two-component (A/B) adhesive

Two-component (A/B) adhesive

Interview
Auto-voiding anaerobic OCA

Auto-voiding anaerobic OCA

Interview


Copyright ©  Guangdong DONESON New Materials Co., Ltd


Contact Us

Phone: 0760-86511168

Phone: 18825004900 (Liu Gong, same WeChat account)

Phone: 18923325516 (Janny Huang from the Ministry of Foreign Trade, same WeChat number)

Fax: 0760-86511171

Address: No. 7 Zhichuang Road, Banfu Town, Zhongshan City


Scan to follow





Contact Us

Phone: 0760-86511168

Phone: 18825004900 (Liu Gong, same WeChat account)

Phone: 18923325516 (Janny Huang from the Ministry of Foreign Trade, same WeChat number)

Fax: 0760-86511171

Address: No. 7 Zhichuang Road, Banfu Town, Zhongshan City


Scan to follow

  


Copyright ©  Guangdong DONESON New Materials Co., Ltd

Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.