Application Fields
Bonding of optical film sheets for display panels of mobile phones, PADs, etc.
Bonding among materials such as ITO, PMMA, PC, glass, metal, etc.
Characteristics
This OCA product is a modified polymer, containing no volatile solvents; acid‑free, with excellent compatibility with ITO, appropriate hardness/softness, superior step coverage, outstanding die‑cutting performance, good tear resistance, strong holding power, fast UV curing, and features such as low curing shrinkage, excellent weatherability, and being environmentally friendly and highly efficient.
Usage Guidelines
Before use, filter the raw material through a 400‑mesh or finer filter screen to remove any gel that may have formed during transportation or storage. If a large amount of gel is found on the screen during filtration, replace the screen promptly and re‑filter the adhesive. Filtration should be carried out under yellow light or in a dark environment to avoid premature curing caused by sunlight exposure. After filtration, allow the adhesive to stand for at least 1 hour in a constant temperature and humidity environment (25 ℃, 50 % RH) to eliminate all bubbles and stabilize viscosity. Apply the OCA adhesive uniformly onto PET film using a suitable coating method (slot‑die extrusion is recommended). If the UV equipment is not equipped with a nitrogen‑purge device, first laminate with a silicone release film, then enter the UV lamp chamber for curing (adjust UV lamp energy and line speed according to your production equipment).
Performance Specifications

Storage Conditions, Shelf Life, and Packaging
Store in a tightly closed container in a cool, dark, and dry place. Shelf life is 6 months. Available in 20 kg/barrel and 200 kg/barrel.
Precautions
1. This adhesive is very sensitive to ultraviolet light; it must be stored in a cool and dark environment. Do not expose the product directly to sunlight or UV light.
2. After filtration, always allow the adhesive to stand to eliminate bubbles before starting production, to prevent bubbles from being introduced during processing and affecting the coating appearance and performance.
3. This adhesive is anaerobic and requires isolation from air to cure.

Copy product links
Long by picture save/share
更多产品推荐